Specifications

• • Rated power is 125 watts x 4 into 4 ohm or 200w x 4 into 2 ohm.
  • Bridged power is 250w x 2 into 8 ohm or 400w x 2 into 4 ohm.
  • The pairs of channels are independently bridgeable.
  • Two or four input configuration.
  • Channels 1+2 feature 24dB per octave Linkwitz Riley High and Low Pass crossovers.
  • Channels 1+2 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass, Low Pass or Bandpass.
  • Channels 3+4 feature 24dB per octave Linkwitz Riley High and Low Pass crossovers.
  • Channels 3+4 can run in FLAT mode (Pre-amplifiers completely bypassed), High Pass, Low Pass or Bandpass.
  • Channels 3+4 in addition feature SUB MODE which introduces a 24dB per octave variable subsonic crossovers and a 40Hz constant Q equalizer.
  • Level controls accommodate input levels up to 8.0v RMS.
  • Pre-amplifiers utilize a fully isolated power supply for zero ground loops.
  • Pre-amplifiers drive the main amplifiers in a fully balanced mode.
  • Class D amplifiers utilize high-speed high current low gate charge MOSFETs.
  • Fully regulated power supply delivers power independent of battery voltage.
  • There are a total of thirteen regulated power supplies.
  • The power supply utilizes six 110 amp MOSFETs in a source follower configuration for maximum bandwidth.
  • Low ESR 105°C capacitors are used in the power supply.
  • Very high efficiency owing to the smart power supply.
  • Tiffany RCA's with Teflon inserts are used for ultimate quality and reliability.
  • Made in the USA